|
|
Inventor
Professional 2009
Autodesk®
Inventor™ Professional software includes all the
extended routed systems design and simulation features
with the core functionality of Autodesk Inventor Suite.
Autodesk
Inventor software is the foundation for Digital Prototyping,
producing an accurate 3D model that validates the form,
fit, and function of a design before it is built. Autodesk
Inventor Professional software includes all the extended
routed systems design and simulation features with the
core functionality of Autodesk Inventor Suite.
- Can be purchased using eLCs
|
The
Autodesk Inventor product line provides an integrated set
of tools for 3D mechanical design and documentation, creating
routed systems, and digitally validating design data to minimize
the need for physical prototypes. Product bundles include
AutoCADMechanical for associative 2D and 3D collaboration
and data management software to manage and track all the design
components of a digital prototype.
Features
Include:
Autodesk
Inventor Suite
Core features of Autodesk Inventor Suite include the following:
- AutoCAD
Integration
- Part
Design
- Assembly
Design
- Sheet
Metal Part Design
- Design
& Manufacturing Documentation
- Data
Management & Communication
- Learning
Resources
- Customization
& Automation
Autodesk
Inventor Routed Systems Suite
The Autodesk® Inventor™ Routed Systems Suite includes
automated tools for designing routed systems, including complex
tube and pipe runs and electrical cable and harness design
helping designers create and validate a more complete 3D digital
prototype.
- Tube
& Pipe Design
- Cable
& Harness Design
Autodesk
Inventor Simulation Suite
Autodesk® Inventor™ Simulation Suite combines easy-to-use
and tightly integrated motion simulation and stress analysis,
making it easier for users to validate a digital prototype
and predict how the design will work under real-world conditions
before the product is ever built.
- Dynamic
Simulation
- Stress
Analysis (FEA)
System
Requirements:
Recommended
System Requirements
The following requirements are recommended for effective use
of Autodesk® Inventor™ 2009 software for general
part and assembly design, typically fewer than 1,000 parts.
Operating
System (1,2,3)
- Windows
Vista® Home Basic, Windows Vista® Home Premium,
Windows Vista® Business, Windows Vista® Enterprise,
Windows Vista® Ultimate, Windows® XP Professional
(SP2), Windows® XP Professional x64 Edition (SP2)
Processor
(4)
- Intel®
Pentium® 4,AMD Athlon® 64, AMD Opteron® or later
(2 GHz or compatible)
Minimum
System Requirements (<1,000 Parts)
- 1
GB RAM (5)
- Direct3D
10, Direct3D 9, or OpenGL-capable graphics card, 128 MB
(6,7)
3.5 GB free hard disk space for installation (8)
- DVD-ROM
drive (9)
- Microsoft
Mouse-compliant pointing device
- 1,280x1,024
screen resolution
- Internet
connection for web downloads and Subscription-aware access
- Microsoft
Internet Explorer® 6 (SP2) through 7 (SP1)
- Microsoft
Excel® 2003 through 2007 for iComponents, thread customization,
and spreadsheet-driven designs
Additional
System Requirements (>1,000 Parts)
- (1)
For installations of Inventor 2009 with single-user local
Content Center and Autodesk Vault 2009 access. Please see
the Autodesk Data Management system requirements for remote
server installations for sharing Content Center and Vault
data among multiple users.
- (2)
Inventor 2009 and AutoCAD® Mechanical 2009 applications
are each provided both as 32-bit and 64-bit applications
for installation and use on the corresponding operating
system only. Autodesk Vault 2009 is a 32-bit application
for installation and use on either a 32-bit or 64-bit operating
system. The 32-bit and 64-bit versions of these applications
are all included in the same package.
- (3)
Autodesk Inventor/AutoCAD Mechanical design applications
and Autodesk Vault must all be the same language on a given
computer. English versions of these applications will run
on any language operating system. Other language versions
of these applications will run on operating systems of that
same language.
- (4)
Inventor 2009 has been optimized to take advantage of the
SSE2 extended instruction sets supported on Pentium 4, AMD
Athlon 64 and AMD Opteron processors. Inventor 2009 will
not install on computers that do not support SSE2. Several
utilities are available on the internet that report CPUID
including supported instructions sets.
- (5)
Autodesk recommends settings that allow Microsoft Windows
to manage virtual memory, as needed. There should always
be at least twice as much free hard disk space as system
memory (RAM).
- (6)
Please refer to the Autodesk published graphics card information.
- (7)
OpenGL graphics hardware acceleration is available only
in legacy feature support mode by Microsoft for Windows
XP Professional only.
- (8)
Required if installing from DVD media. Electronic download
methods may be available in some situations and require
additional hard drive space to store the downloaded files
prior to installation. File sizes are indicated at time
of download, and overall hard disk space requirements are
based on the selected files and products being downloaded.
These files can be deleted after installation.
- (9)
Inventor 2009 is available on DVD media or, in some situations,
via electronic download. (CD media is no longer available.)
DVD-ROM drive is not required if installing downloaded software.
Education
Requirements
- For
Autodesk Inventor 2009 for basic educational purposes and
for small assembly designs, the minimum system requirements
are 512 MB of RAM and 1.5 GB of available hard disk space.
You will need an additional 1.8 GB of hard disk space to
install Content Center; this tool can be installed either
on a local workstation or on a centralized server for access
by multiple users.
Pricing:
- Can be purchased using eLCs
| Autodesk
Inventor Professional 2009 |
ex.
VAT
|
| Single
Pack (no subcription available) |
£150.00
|
| Additional
License (no subcription available) |
£150.00
|
| Student
Single Pack (13 Month License) |
£60.00
|
| Autodesk
Inventor Professional 2009 (Network) |
ex.
VAT
|
| 10
Pack License (+ 1 Teacher License) |
£995.00*
|
| 10
Pack License (+ 1 Teacher License) |
£770.00**
|
| 20
Pack License (+ 2 Teacher License) |
£1,595.00*
|
| 20
Pack License (+ 2 Teacher License) |
£1,145.00**
|
*
No Subscription available
**
Only available if ordered with Subscription
| Autodesk
Subscriptions* |
ex.
VAT
|
Education
Subscription (1 Year)
|
£42.50
|
| Education
Subscription (1 Year) Renewal |
£42.50
|
*
Price per seat.
The Autodesk Subscription
Program (anuual fee), is a software maintenance and support
offering that ensures you stay up-to-date with the latest
version of your licensed Autodesk software.
|
|
Platform, Geospatial
& Plant
Manufacturing
Solutions Division
Architecture,
Engineering & Construction
Media &
Entertainment
|
